Ultra-Isolation Transformer Series
Complete electrical decoupling to shield sensitive electronics, medical instruments, and data networks from line noise, spikes, and ground loops. Designed with electrostatic shielding for optimal attenuation.
- ⚡ Power rating: 10kVA – 1000kVA
- 🛡️ Shielding: Electrostatic Faraday Shield
- 🔇 Noise attenuation: >120dB Common Mode Rejection
- 🔌 Winding material: 100% Electrolytic Copper
- 🌡️ Operating temp: -20°C to 50°C
Four isolation tiers, zero noise
Galvanic isolation platforms engineered to protect delicate equipment from ground loops and line noise.
Galvanic Isolation Features
Complete Galvanic Isolation
Physically separates primary and secondary windings to isolate sensitive equipment from utility noise.
High Common-Mode Noise Rejection
Suppresses electrical transients, spikes, and high-frequency noise up to 120 dB across sensitive loads.
Electrostatic Faraday Shielding
Integrated copper electrostatic shield redirects capacitive noise directly to ground safely.
High Breakdown Insulation Voltage
Heavy dielectric insulation withstands impulse voltages and ground fault conditions easily.
Low Operational Losses & Heat
Built with high-permeability cold-rolled grain-oriented (CRGO) steel cores for maximum energy efficiency.
Zero Ground Loop Interference
Eliminates neutral-to-ground voltage potential discrepancies in data centers and medical rooms.
Technical specifications
* K-Factor ratings (K-4, K-13, K-20) available for non-linear load environments such as IT server rooms.
Galvanic protection for noise-sensitive installations
Surgical & Medical ICUs
Eliminates dangerous ground leakage currents to keep patient monitoring systems safe.
Data Centers & Server Rooms
Suppresses electrical noise and prevents neutral-to-ground voltage potential buildup.
Audio/Video & Telecom
Blocks ground loops and mains hum, guaranteeing clean signal transmission.
Precision Testing Labs
Isolates delicate analytical balances, lab instruments, and calibration equipment.
Ready to eliminate electrical noise & ground loops?
Share your primary/secondary voltages and load sensitivity requirements — we'll configure your galvanic isolation transformer.
